The MA5616 applies in fiber to the building (FTTB) and fiber to the curb (FTTC) scenarios. It can also function as a mini-digital subscriber line access multiplexer (DSLAM) or multiservice access node (MSAN). The MA5616 can be installed in corridors or cabinets (indoor or outdoor).
Each MA5616 provides user-to-network interfaces (UNIs), such as ADSL2+, VDSL2, SHDSL, POTS, FE, P2P, ISDN, or combo ports, and two network-to-network interfaces (NNIs) that support autonegotiation among GPON, EPON
Product Display
The following figure shows the appearance of the MA5616 equipped with a CCUE control board and PAIC power board.
CCUE control board
Hardware Structure
Commissioning serial port/Environment monitoring port
For the CON port: supports local and remote maintenance, which allows users to configure the MA5616 using software, such as HyperTerminal, through CLI. The default baud rate is 9600 bit/s.
For the ESC port: connects to an environment monitoring unit (EMU), which sends monitored environment monitoring parameters to the MA5616.
Uplink optical port
Supports auto-negotiation among GPON, EPON, and GE. Provides GPON, EPON, and GE upstream transmission or GE cascading. When this uplink optical port is used as a GE port, it is an alternative to the GE electrical (RJ45) port.
Maintenance network port
A 100M Base-T commissioning network port, which is a front-access-cabled FE port and supports 100 Mbit/s full-duplex in auto-negotiation mode.
Clock port
Outputs 2 MHz clock pulse signals.
Environment parameter monitoring port
Can be connected to a sensor to monitor environment parameters.
GE electrical port
Supports 1000 Mbit/s full-duplex upstream transmission or cascading in auto-negotiation mode. It is an alternative to the uplink optical (SFP) port.
No comments:
Post a Comment