How to Log In to Huawei S2300 S3300 Switch System for the First Time?

How to Log In to Huawei S2300 S3300 Switch System for the First Time?

Example for Performing Basic Configuration on the Device at First Login

Networking Requirements
After logging in to the device through the console port, set the user level for Telnet users 0
through 4 to 15, and set the authentication mode to AAA authentication.

Networking diagram for configuring the device through the console port

Configuration Roadmap
1. Log in to the device through the console port.

The HyperTerminal of Windows XP can be used as the terminal emulation software on the PC.
2. Configure the device

Procedure
Step 1 Log in to the device from PC1 through the console port. For details, see Logging In Through
the Console Port.
Step 2 Configure the device.
# Set the system date, time, and time zone.
<Quidway> clock timezone BJ add 08:00:00
<Quidway> clock datetime 20:10:0 2012-07-26
# Set the device name and IP address of the management interface.
<Quidway> system-view
[Quidway] sysname Server
[Server] vlan 10
[Server-vlan10] quit
[Server] interface ethernet 0/0/1
[Server-Ethernet0/0/1] port hybrid pvid vlan 10
[Server-Ethernet0/0/1] port hybrid untagged vlan 10
[Server-Ethernet0/0/1] quit
[Server] interface vlanif 10
[Server-Vlanif10] ip address 10.137.217.177 24
[Server-Vlanif10] quit
# Set the user level and authentication mode for Telnet users.
[Server] user-interface vty 0 4
[Server-ui-vty0-4] user privilege level 15
[Server-ui-vty0-4] authentication-mode aaa
[Server-ui-vty0-4] quit
[Server] aaa
[Server-aaa] local-user huawei password cipher huawei2012
[Server-aaa] local-user huawei privilege level 15
[Server-aaa] local-user huawei service-type telnet
[Server-aaa] quit
Step 3 Verify the configuration.
When completing the configuration, you can log in to the device such as S3328TP-PWR-EI
through Telnet on PC2.
Access the command line interface of Windows XP and log in to the device through Telnet.
C:\Documents and Settings\Administrator> telnet 10.137.217.177
Press Enter. On the displayed login page, enter the user name and password. If the authentication
succeeds, the command line interface for the user view is displayed. (The following information
is only for reference.)
Login authentication
Username:huawei
Password:
Info: The max number of VTY users is 15, and the number