Configuring a GPON ONT Capacity Profile (Distributed Mode)

A GPON ONT capability profile identifies the actual capability of a GPON ONU. After an ONT is added and bound to a Huawei GPON ONT capability profile, the ONU carries the corresponding services according to parameters configured in the capability profile.

Context

All GPON ONUs must be bound to the GPON ONT capability profile. Specify the ONT capability profile when running the ont add command to add an ONU offline or running the ont confirm command to confirm an automatically discovered ONU.

Currently, the system provides seven default ONT capability profiles that are solidified in the system. The default profiles cannot be modified. The default profile IDs range from 1-7. The reserved ONT capability profile IDs are 8-16.

The contents of the capability profile restrict the port number that is used in commands for GEM port mapping, T-CONT/PQ mapping, and the ONT VLAN management.

The ONT capability profile must be configured according to the actual capability of the ONU. Different the capability profile parameters vary according to different ONUs.

Procedure

Step 1 Run the ont-profile add command to configure an ONT HG8546M capability profile.

• When you add an ONT capability profile, if the profile ID is not specified, the system automatically allocates the least idle profile ID; if the profile name is not specified, the system adopts the default name ont-profile_x, where, x is the corresponding ONT capability profile ID.
• The system supports up to 128 ONT capability profiles.
• The system default profiles include the MDU profile and several common ONT (such as OT925, HG850, and HG810) profiles, which can be directly used. It is recommended to manually configure an ONT capability profile only when the default ONT capability profile fails to meet actual requirements.
• When you add an MDU profile manually, the number of the ports must be set to zero.

Step 2  Run the display ont-profile command to query the ONT capability profile.