What are the Highlights of Huawei SmartAX MA5600T/MA5603T/MA5608T Product (2)

Aggregation Management for Remote Sites

Huawei OLT supports aggregation management and plug-and-play for remote sites. This eliminates the needs of onsite software commissioning and OSS system integration, which simplifies device management.
The management of remote devices is concentrated on the OLT through the GE aggregation. In this way, the service configuration, software upgrade, and maintenance for remote sites can be implemented using the OLT, which greatly reduces the management complexity of an FTTx network.

Seamless Migration for PSTN Networks

The MA5600T/MA5603T/MA5608T provides access for various traditional services, enabling a PSTN network seamlessly evolve to an IP network.

Smooth Evolution from GPON to 10G GPON

By adding the WDM1r component, the MA5600T/MA5603T can be smoothly upgraded from GPON to 10G GPON.
Carriers can newly construct a 10G GPON network or upgrade a GPON network to a 10G GPON network. Specifically, the WDM1r component is added to the OLT so that GPON and 10G GPON signals can be transmitted over the same ODN in the multiplexing mode.

Configuring a GPON ONT Capacity Profile (Distributed Mode)

A GPON ONT capability profile identifies the actual capability of a GPON ONU. After an ONT is added and bound to a Huawei GPON ONT capability profile, the ONU carries the corresponding services according to parameters configured in the capability profile.

Context

All GPON ONUs must be bound to the GPON ONT capability profile. Specify the ONT capability profile when running the ont add command to add an ONU offline or running the ont confirm command to confirm an automatically discovered ONU.

Currently, the system provides seven default ONT capability profiles that are solidified in the system. The default profiles cannot be modified. The default profile IDs range from 1-7. The reserved ONT capability profile IDs are 8-16.

The contents of the capability profile restrict the port number that is used in commands for GEM port mapping, T-CONT/PQ mapping, and the ONT VLAN management.

The ONT capability profile must be configured according to the actual capability of the ONU. Different the capability profile parameters vary according to different ONUs.

Procedure

Step 1 Run the ont-profile add command to configure an ONT HG8546M capability profile.

• When you add an ONT capability profile, if the profile ID is not specified, the system automatically allocates the least idle profile ID; if the profile name is not specified, the system adopts the default name ont-profile_x, where, x is the corresponding ONT capability profile ID.
• The system supports up to 128 ONT capability profiles.
• The system default profiles include the MDU profile and several common ONT (such as OT925, HG850, and HG810) profiles, which can be directly used. It is recommended to manually configure an ONT capability profile only when the default ONT capability profile fails to meet actual requirements.
• When you add an MDU profile manually, the number of the ports must be set to zero.

Step 2  Run the display ont-profile command to query the ONT capability profile.