MA5616 Gold Line configuration including:
- MA5616 Chassis
- 1 CCUB equipped.
- 1 PA1B equipped, Connect Power Board 220V AC
- 4 PCS ADLE 32 ADSL2+ boardHuawei MA5616 Gold Line Configuration, is a recommended board bundle provided by Thunder-link.com, it has most common service type and ordinary ports. You can find other configuration bundle at CONFIGURE page, where you can even configure by yourself by selecting the boards you need. If you need customized configuration, please contact with Thunder-link.com Sales Team. who will come back to you shortly.
Q: Can I use MA5616 with my OLT MA5680T?
A: Yes, it supports GPON uplink, make sure you select the uplink board with GPON ports, also get the GPON SFP module for MA5616.
Q: Can I get technical support from thunder-link.com if we purchase MA5616 from you?
A: Yes, thunder-link.com has experienced technical team on Huawei xDSL solution, however, you may need to purchase technical support service from us as by default we only provide one year hardware warranty.
Q: Can I configure a MA5616 with 256 ADSL2+ ports?
A: Yes, but the 64 ADSL2+ ports board price is high, also have requirement on main control board which may make your cost high, so suggests for small site purchase the MA5616 with 128 ADSL2+, if need more than that consider big DSLAM MA5600 or 2 units MA5616 using cascading.
Q: Does MA5616 support vectoring?
A: Yes, but will require CCUE main control board, software will be V800R313C00, power board should be high power DC, also the VDSL2 board should be 48 ports VDSL2 board VCMM.
Q: What is the difference between differ MA5616 main control board?
A: As follow table:
| CCUB | CCUC | CCUE | |
| Supported Daughter Board | Upstream daughter board: GP1A GE1A Voice daughter board: ADSA ADSC ADSM | Upstream daughter board: UP2A UP2C XP1A Voice daughter board: ASDA ADSC ASDM | Upstream daughter board: UP2A UP2C XP1A Voice daughter board: ASDA ADSC ASDM |
| Port on the Front Panel (on the Bottom Plate) | CONSOLE ESC ETH ALARM GE0 | CON/ESC ETH CLK/TOD ALARM GE | CON/ESC ETH CLK/TOD ALARM GE |
| ALARM GE0 | ALARM GE | ALARM GE | |
| Upstream Port (on the Daughter Plate) | When the GP1A daughter board is configured: GE0 (SFP port) PON (SFF port) When the GE1A daughter board is configured: GE0 (SFP port) GE1 (SFP port) | When the UP2A or UP2C daughter board is configured: 0 (SFP port) 1 (SFP port) When the XP1A daughter board is configured: 10G GPON (SFP port) | When the UP2A or UP2C daughter board is configured: 0 (SFP port) 1 (SFP port) When the XP1A daughter board is configured: 10G GPON (SFP port) |
Q: What is the difference of CCUD main control board?
A: CCUD can only be supported in MA5616 software V800R312, V800R313. Also with CCUD, MA5616 can only support 1*GPON + 1*GE uplink.
Q: Do I need to add some item if I want to configure voice on MA5616?
A: Yes, DSP subboard will need to be added if voice service required.
Q: Do I have the software when purchase the MA5616?
A: Yes, software already loaded in MA5616.
Q: Is the SFP Module included in MA5616 configuration?
A: No, it is not included, you will need to purchase additionally.
Telephone: 852-30623083
Email: Sales@Thunder-Link.com
Website: http://www.thunder-link.com
More related:
Introduction to MSTP_Prelude_Overview and History
Introduction to MSTP_Prelude_Overview and History
No comments:
Post a Comment