How Do I Configure Screen Display for Huawei Switch?

Last year, I bought the Huawei switch S5700-28C-SI from Thunder-link.com, can’t configure the screen display, luckily, the technical of their company kindly told me the solved ways and commands. Hope can help you.

• Setting the number of rows displayed on a screen

Run the screen-length screen-length [ temporary ] command in the user view or user interface view to set the number of rows to be displayed on a screen.
You must specify temporary when running the command in the user view. The configured value takes effect only on the current VTY user interface but does not take effect on the next login on the same user interface or login on other VTY user interfaces.
The default number of rows to be displayed on a screen is 24.

• Setting the number of columns displayed on a screen

Run the screen-width screen-length command in any view to set the number of columns to be displayed on a screen.
The default number of columns to be displayed on a screen is 80. Each character is a column.

More blog: 

Optical attenuation is too large lead to ONU recovery failure

Introduction to MSTP_Prelude_Overview and History

Ultra-Long-Haul Transmission

​MA5600T Series Equipment Aggregate Docking Cisco Equipment

Implementation of TR069 protocol in MA5600 series