Showing posts with label HG8240. Show all posts
Showing posts with label HG8240. Show all posts

Thursday, February 25, 2016

Huawei GPON ONT HG8245 FAQ

Q: What is the difference between HG8245 and HG8245A and HG8245T?
A: You can visit the below rink to know more...

Q: What is the difference between GPON HG8245 and ONT HG8240ONT HG8240F?
A: The main difference is HG8245 comes with WiFi, HG8240/HG8240F not.

Q: Do you have HG8245 with C+ Module?
A: No, we only have some HG8010H NOT with C+ module.

Q: Do you have 4*GE version HG8245?
A: No, there is only 4*FE version, actually the GPON speed 2.5Gbps after splitting, even just 1:32, average each user can only get 78Mbps, also on the customer side 100Mbps is enough for normal use. For certain customer who really need super high speed internet, you may consider to use HG8010H which has 1*GE, or in some commercial areas, using Huawei MDU, like MA5626, MA5612 which has multiple GE ports.

Q: Do you have documentation of HG8245?
A: Yes, you may contact Thunder-link sales person.

Q: My HG8245T is with SC/APC, Huanetowrk HG8245 is SC/UPC, do I have any problems?
A: No, it is going to be fine, just make sure you use the cable with SC/UPC connector, Thunder-link also offers SC/UPC connector.

Q: Do I need to have 2 cable for HG8245, one in one out?
A: No, one cable is enough, the GPON is using WDM technology, which only
require one cable.

Q: Can I use HG8245 with other brand OLT?
A: Thunder-link not suggest, as the understanding between different vendor on TR069/OMCI may different.

Q: Does HG8245 support routing function?
A: Yes.

Q: Does HG8245 support battery back?
A: No.
More related:

Situation When Carry 10GE Traffic On OSN3500

Be Ware of Software Watchdog Reset on the System Control Board of OptiX OSN Equipment

Wednesday, January 27, 2016

How to configure the MA5683T GPON&EPON start instructions part2

EPON:
Huawei OLT
1、Configure Upstream
vlan 100 smart   \\Add network management vlan
vlan 1001 smart   \\Add PoC vlan
Add the corresponding vlan to the uplink:
port vlan 100 0/6 0
port vlan 1001 0/6 0
Configuration management address:
interface vlanif 100
 ip address 192.168.10.100 255.255.255.0
2、Configuration DBA template
dba-profile add profile-id 10 type2 assure 20480
3、Configure line template
ont-lineprofile epon profile-id 10 profile-name HG8240
llid dba-profile-id 10
commit
4、Configure PoC template
ont-srvprofile epon profile-id 11 profile-name HG8240
ont-port eth 4 pots 2
Note: Must be based on the ONT actual number of port configuration,if you don't know it,you can enter the Epon veneer mode using the command "disp ont capability" view.
port vlan eth 1 100
commit
5、Add ONT equipment
intface epon 0/0
port 1 ont-auto-find enable
disp ont autofind 1
ont add 1 0 mac-auth 0000-0000-0001 oam ont-lineprofile-id 10 ont-srvprofile-id 11
Designate ONT port default vlan
ont port native-vlan 1 0 eth 1 vlan 1001
6、Configure PoC virtual port
service-port vlan 1001 epon 0/0/1 ont 0 multi-service user-vlan 1001

If in the fttb networking,Olt side only need to configure the line template, do not need to configure PoC template,add onu use snmp protocol。

Huawei ONU
1、Configure Upstream
vlan 1001 smart
port vlan 1001 0/0 1
2、Configure PoC port
service-port vlan 1001 adsl 0/0/30 vpi 0 vci 35 rx-cttr 6 tx-cttr