FAQs of Document Use When Handling Huawei MA5800 Alarms and Events
This alarm and reference document, if used flexibly, can help you to rectify the faults quickly, thus improving maintenance efficiency and facilitating the management of alarms and events in the system.
Q1: How to enter the special CLI mode
A1: The following considers the FAN mode as an example to describe how to enter the FAN mode:
- Click a command in the steps.
- In the interface that is displayed, you can see the mode of the command. The User Guide describes how to enter this mode.
Q2: Why is the recovery alarm not displayed after the fault is rectified
A2: The following situations may occur:
- This alarm is an ADMC alarm caused by an ADMC fault. After the ADMC fault is rectified, the system does not generate a recovery alarm. Therefore, manual operations are needed. You can run the alarm active clear command to clear the alarms that are not recovered in the system.
- The system checks the faults periodically. The system generates a recovery alarm only after detecting that the faults are rectified.
Q3: How to search for an alarm or event in the document
A3: You can follow one of the following two methods to search for an alarm or event.
- Search for an alarm or event according to the alarm ID or the event ID.
- Search for an alarm or event according to the name of the alarm or event.
More related:
No comments:
Post a Comment