Configuring FTTH Service (P2P Access)

Users connected to the OLT through an ONT, and are therefore provided with the Internet,
VoIP, and IPTV service through a same port.

Service Requirements

• ONT_1 and ONT_2 are provided with the triple play service through Huawei FTTH.
• The Internet access service is provided in the PPPoE access mode.
• The IPTV user connected to ONT_1 can watch all the programs, and the IPTV user connected to ONT_2 can watch only program BTV-1.
• The VoIP service and the IPTV service are provided in the DHCP mode and obtain IP, addresses from the DHCP server in the DHCP option-60 mode.
• After receiving different traffic streams, the OLT provides different QoS guarantees to the traffic streams according to the priorities of the traffic streams.
• Traffic streams are differentiated on the OLT by the user-side VLAN (C-VLAN).

Example network of the optical fiber access service in the single-port for multiple

services mode

Prerequisite

• Huawei OLT is connected to the upper-layer devices such as the BRAS, multicast server, SoftX3000, and DHCP server.
• The VLAN of the LAN switch port connected to the OLT is the same as the upstream VLAN of the OLT.

Procedure

Configure the Internet access service on the OLT.

a. Create a VLAN and add an upstream port to the VLAN.

The VLAN ID is 100, and the VLAN is a smart VLAN. The upstream port is 0/9/0.

b. Configure a traffic profile.

Because the VoIP, IPTV, and Internet access services are provided through the same

port, you must set the 802.1p priority of each service. Generally, the priorities are in a descending order for the VoIP service, IPTV service, and Internet access service.

In this example, set the traffic profile index to 7 and the priority of the Internet access service to 1.

c. Configure a service port.

Add a service port to the VLAN and use traffic profile 7. The user-side VLAN ID is 2.

d. Configure queue scheduling.

Use the 3PQ+5WRR queue scheduling. Queues 0-4 adopt the WRR mode, with the

weights of 10, 10, 20, 20, and 40 respectively; queues 5-7 adopt the PQ mode.

Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map

queues 0-7 respectively.

e. Save the data.

Configure the VoIP service on Huawei MA5600T.

a. Create a VLAN and add an upstream port to the VLAN.

The VLAN ID is 200, and the VLAN is a smart VLAN. The upstream port is0/9/0.

b. Configure a traffic profile.

The traffic profile index is 8, and the 802.1p priority of the VoIP service is 5.

c. Configure a service port.

Add a service port to the VLAN and use traffic profile 8. The user-side VLAN ID is 3.

d. Configure the DHCP relay.

The VoIP service and the IPTV service are provided in the DHCP mode. The DHCP

option 60 domain is used to differentiate service types.

The DHCP domain of the VoIP service is voice.

The IP addresses of VoIP DHCP server group 1 are 20.1.1.2 and 20.1.1.3.

The IP address of the Layer 3 interface of VLAN 200 is 10.1.1.1/24.

The gateway IP address of the DHCP domain is 10.1.1.1/24.

e. Save the data.

Configure the IPTV service on the OLT.

a. Create a VLAN and add an upstream port to the VLAN.

The VLAN ID is 1000, and the VLAN is a smart VLAN. The upstream port is0/9/0.

b. Configure a traffic profile.

The traffic profile index is 9, and the 802.1p priority of the IPTV service is 4.

c. Configure a service port.

Add a service port to the VLAN and use traffic profile 9. The user-side VLAN ID is d. Configure the DHCP relay.

The VoIP service and the IPTV service are provided in the DHCP mode. The DHCP

option 60 domain is used to differentiate service types.

The DHCP domain of the IPTV service is video.

The IP addresses of IPTV DHCP server group 2 are 20.2.2.2 and 20.2.2.3.

The IP address of the Layer 3 interface of VLAN 1000 is 10.2.2.1/24.

The gateway IP address of the DHCP domain is 10.2.2.1/24.4.

e. Create a multicast VLAN and select the IGMP mode.

Select the IGMP proxy mode.

f. Set the IGMP version.

Set the IGMP version of the multicast VLAN to IGMP v3.

g. Configure the program library.

Configure the program names to BTV-1 and BTV-2, multicast IP addresses of the

programs to 224.1.1.10 and 224.1.1.20, source IP address of the programs to

10.10.10.10, and priority to 4.

h. Configure the right profile.

Configure the profile name to profile0, with the right of watching program BTV-1.

i. Configure the multicast users.

Add service ports 200 and 300 as multicast users.

j. Save the data.