Showing posts with label S3700-28TP-SI-AC. Show all posts
Showing posts with label S3700-28TP-SI-AC. Show all posts

Tuesday, April 5, 2016

The Characteristics of Huawei S3700

The S3700 switch (S3700 for short) is an enterprise networks access device that provides access and data transport functions. The S3700 is developed by Huawei to meet the requirements for reliable access, aggregation, and high-quality transmission of multiple services on an enterprise networks. The S3700 functions as the access device of the enterprise networks. The S3700 provides large capacity, high port density, and cost-effective packet forwarding capabilities. The S3700 also provides multi-service access capabilities, excellent extensibility, quality of service (QoS) guarantee, powerful multicast replication, and carrier-class security, and can be used to build high-reliability ring topologies.

Huawei S3700 Characteristics

Energy-Saving Design
The S3700 saves energy in the following ways:
l Some models adopt natural heat dissipation, so fans are not required.Natural heat
dissipation has the following advantages:
– Product reliability is high.
– There is no noise pollution.
– Fans do not need to be maintained periodically, which saves the maintenance cost.
– The system does not have additional power consumption generated by fans, which
improves the power efficiency.
–        Boards are prevented from being eroded.
NOTE
Currently, the S3700-28TP-EI-MC-ACS3700-28TP-SI-ACS3700-28TP-SI-DC, S3700-28TP-EI-AC, and S3700-28TP-EI-DC adopt natural heat dissipation.
l The interface chip switches to the power saving mode when an interface is idle, which
means that no peer device is connected to the interface.
l It uses advanced highly-integrated and energy-saving chips. With the help of the intelligent device management system, the chips improve system performance and also reduce system power consumption.

Advanced Surge Protection Technique
The S3700 uses the Huawei patented built-in surge protection technique. This technique protects devices against lightning in terrible weather and increases device security.
Convenient PoE Power Supply
The S3700 PoE model has the Power over Ethernet (PoE) function. It provides centralized power supply for IP phones, wireless access points (APs), portable device chargers, POS machines, cameras, and data collectors by using twisted pairs.
Complying with IEEE 802.3af and IEEE 802.3at, the S3700 PoE model is able to remotely
provide power for the devices of different vendors. IEEE 802.3at delivers a maximum of 30 W power. This allows IEEE 802.3at to support IP video phones, dualband WiFi APs, IP cameras, multi-function STBs, and RFIDs, and simplifies the network.
The S3700 PoE model has the ability to control power supply based on time range, which
effectively manages network devices, reduces power consumption, and lowers the OPEX.
Note:
The S3700 series Ethernet switches are class A products. Customers should take preventative measures as the operating devices may cause radio interference.
Telephone: 852-30623083
           Supports@Thunder-link.com            

Wednesday, March 23, 2016

Huawei S3700 Switch: IPv4 and Ipv6 Features

IPv4 Features of Huawei S3700 Switch:
(1) The S3700 supports the following IPv4 features:
l TCP/IP protocol stack, including ICMP, IP, TCP, UDP, socket (TCP/UDP/Raw IP), and
ARP
l Static DNS and specified DNS server
l FTP server/client, TFTP client, and SSH
l Ping, tracert, and Network Quality Analysis (NQA): NQA can detect the status of ICMP,
TCP, UDP, DHCP, FTP, HTTP and SNMP services and test the response time of various
Services
l DHCP Server, DHCP Relay, DHCP Client, and DHCP Snooping
l BFD, including BFD for OSPF, BFD for ISIS, BFD for BGP, and BFD for PIM

NOTE
The BFD functions are not available on S3700SI.

(2) Unicast Routing Features
NOTE
The static routes, RIP and RIPng are available on S3700SI. But the other routing protocols and routing policy are not available
.
The S3700 supports the following unicast routing features:
l IPv4 unicast forwarding at line speed through bottom-layer ASIC chips
l IPv4 routing protocols, including RIP v1/v2, OSPF, IS-IS, and BGPv4
l Virtual Routing Forwarding (VRF)
l Static routes that are manually configured by the administrator, which simplify network
configuruations and improve network performance
l Selection of the optimal route through the perfect routing policy
(3) Multicast Routing Features
NOTE
The multicast routing features are not available on S3700SI, available on S3700EI.
The S3700 supports the multicast function. This saves network bandwidth and reduces network load. The S3700 also guarantees QoS of multicast traffic and forwards multicast traffic at line speed. It supports the following multicast routing features:
l IPv4 multicast forwarding at line speed through the bottom-layer ASIC chips
l Multicast protocols, including IGMP, PIM-SM
l ASM and SSM
l Multicast static routes
l Routing policy used for receiving, importing, and advertising multicast routes. When
forwarding IP multicast packets, the S3700 can filter and forward the packets based on
policies.
l PIM BFD
l RPF check
IPv4 routing protocols:
– Open Shortest Path First version 2 (OSPFv2)
– Intermediate System-to-Intermediate System (IS-IS)
– Border Gateway Protocol version 4 (BGPv4)
– Routing Information Protocol (RIP)
IPv6 Features of Huawei S3700 Switch:
The OSPFv3 and VRRP6 are not available on S3700SI switches.
The S3700 provides the IPv6 host function, which protects the investment of customers and prevents repeat investment during network upgrade.
The IPv6 functions supported by the S3700 include:
l IPv6 protocol stack
l Unicast routing protocols: RIPng and OSPFv3
l VRRP6
l IPv4/IPv6 transition technologies

IPv6 routing protocols:
– OSPFv3
– RIPng
Telephone: 852-30623083
           Supports@Thunder-link.com