Do you know how to configure GPON FTTH Layer 2 Internet Access Service on the NMS?

Services can be configured for an Huawei ONT HG8245H only after the ONT is successfully added to an OLT.

Networking

• The PC gains access to the Internet in PPPoE dialup mode.
• The ONT is connected to the GPBC card of the OLT through an optical fiber.
• The broadband remote access server (BRAS) provides broadband user access and functions of authentication and accounting.

Configuring the GPON FTTH Internet service 

Procedure

 NOTE:

After all profiles are configured, perform the following steps to issue them to the device:

• In the information list, right-click the record and choose Download to NE from the shortcut menu.
• In the dialog box that is displayed, select the required NE(s), and click OK.

1, Configure a DBA profile.

2, Configure a line profile.

In a line profile, a GEM port can be bound to up to eight service streams. In a GEM port, different GEM connections need to be set up for different service streams.

In this example, the mapping between GEM ports and ONT-side services is implemented through VLANs, and the service streams of each service are mapped to GEM port 14. In addition, different GEM connections are set up for the management VLAN and the VLANs for the Internet, voice, and multicast services.

3, Configure a service profile.

Set the port capability set to adaptive. Then, the system adapts the port capability set of an online ONT to its actual capability. Then, in the ONT service profile, configure a VLAN translation policy to translate C-VLAN 1001 to VLAN 100.

4, Configure an MEF IP traffic profile.

The profile name is ftth_hsi, CIR is 4 Mbit/s, and the priority is 0. Traffic is scheduled based on the priority specified in the profile.

5, Configure a service VLAN on the OLT MA5600T side.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

A service VLAN is the VLAN used for the Internet service.

Provision services.

The prerequisite for performing operations in the navigation tree is to navigate to the NE Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the Main Topology, double-click the required OLT in the Physical Root navigation tree; or right-click the required OLT and choose NE Explorer from the shortcut menu.

1. Add an ONT.
   The ONT connects to the GPON port 0/1/0 is ONT 1. The serial number of the ONT is 32303131D659FD40, password is 0100000001, discovery mode for password authentication is once-on, management mode is OMCI, bound ONT line profile name is ftth, and the ONT service profile name is ftth.
2. Configure an ETH port of Huawei GPON ONU.
3. Add a service virtual port on the OLT side.

Result

Check whether the user successfully gains access to the Internet through dialup on the PC.

1. The LAN1 port of the ONT is connected to the Ethernet port of the PC properly.
2. Dial up on the PC using the PPPoE dialup software.
3. The user gains access to the Internet on the PC after the dialup is successful.