1.Turn on the computer telnet service.
2.Turn on the optical modem telnet service.
Under normal circumstances, the optical modem is the default account password:
telecomadmin
nE7jA%5m
Install the Firefox browser and webdeveloper plug-in, login after the optical modem, in the Security page ont access with webdeveloper plug-in shows elements that are hidden, tick allow LAN PC side through telnet access ", click on the application, you can open optical modem telnet.
To management and equipment management USB backup configuration to first insert U disk backup, then the USB fast recovery enable tick lest after accidentally reset lead to restore the settings cannot be changed back
3.acquisition vlan ID
telnet 192.168.1.1 root admin
get port config portid 1
The value of PortVid corresponding to vland ID, PortPri corresponds to 802.1p, please remember these two values.
4.Modify the number of connections
telnet 192.168.1.1
root
admin
shell
cd /mnt/jffs2
cp hw_ctree.xml wy.xml
cp wy.xml wy1.xml.gz
aescrypt2 1 wy1.xml.gz tmp
gzip -d wy1.xml.gz
vi wy1.xml
/TotalTerminalNumber
Press I to enter the edit mode, according to the back of the grid to delete, modify, press ESC to exit edit mode.
:wq
gzip wy1.xml
aescrypt2 0 wy1.xml.gz tmp cp -f wy2.xml.gz hw_ctree.xml
Please restart the router.
5.HUAWEI to restore the original factory interface, modify the name of the wireless network.
HG8245C can not modify the name of the wireless network in the telecommunications interface, you must first restore the original HUAWEI factory interface.
telnet 192.168.1.1 root admin shell
cd /mnt/jffs2 vi hw_boardinfo
The value of the 0x0000001a and 0x0000001b are changed to COMMON, and then you can modify the wireless network name.
6.Configure Internet access mode, Bridge to modify the routing.
Note that when modifying routing mode, VLAN ID and 802.1p to value obtained using the third step.
More related:
No comments:
Post a Comment