4 Modifying GNE Parameters
During the network optimization and adjustment, you may need to change the GNE type or modify the communication address.
Prerequisites
You must be an NM user with NE maintainer authority or higher.
Step 1Choose System > DCN Management from the Main Menu. Click the GNE tab.
Step 2 Select the GNE to be modified, right-click and choose Modify GNE from the shortcut menu.
Step 3In the Modify GNE dialog box displayed, set Gateway Type .
NOTE
Do not modify the Port No..
Make sure that the IP address of the GNE is in the same network segment as the IP address of the U2000. If they are not in the same network segment, set the corresponding network ports, to make sure that the U2000 can log in to the GNE.
Step 4 Click OK. In the Operation Result dialog box that is displayed, click Close.
----End
5 Changing the GNE for NEs
When the GNE that the non-gateway NE belongs to is changed and this non-gateway NE does not belong to another GNE, you need to change the GNE to maintain the communication between the NEs and the U2000. Alternatively, if a GNE manages more than 50 NEs, change the GNE for some NEs so that the communication between the U2000 and the NEs is not affected.
Prerequisites
You must be an NM user with NE maintainer authority or higher.
Procedure
Step 1 Choose System > DCN Management from the Main Menu.
Step 2 Click the NE tab.
Step 3 Select an NE. Double-click the Primary GNE1 field and select a GNE from the drop-down list.
Step 4 Click Apply. Click Close in the Operation Result dialog box.
Step 5Click Refresh.
----End
Customers interested in purchasing huawei SDH or the price, please refer to below links:
More related:
No comments:
Post a Comment