Modifying NE Attributes of Huawei Transmission, there are several things you should do:
1 Modifying the NE ID
The ECC protocol uses the NE ID as the unique identifier of an NE. The U2000 also uses the NE ID to identify different NEs in the user interface and databases, and uses the NE ID as the key word in searches. Hence, you need to assign a unique NE ID to each NE when planning a network. If an NE ID conflicts with another NE, it results a collision in the ECC route. As a result, it becomes difficult to manage some NEs. In the commissioning or expansion process, when you need to adjust the original planning and modify the NE ID, you can use the U2000 to achieve it. In the case of the OptiX OSN equipment, if the IP address of the system control board is not set, the IP address changes with the NE ID. If the IP address is set once, however, the IP address does not change with the NE ID.
Prerequisites
You must be an NM user with NE operator authority or higher.
The NE must be created.
The steps:
Step 1In the NE Explorer, select an NE and choose Configuration > NE Attribute from the Function Tree.
Step 2 Click Modify NE ID, and the Modify NE ID dialog box is displayed.
Step 3Enter the New ID and the New Extended ID. Click OK.
Step 4 Click OK in the Warning dialog box.
----End
2 Modifying the NE Name
You can modify the NE name as required. This operation does not affect the running of the NE.
Prerequisites
You must be an NM user with NE operator authority or higher.
Step 1 In the NE Explorer, click the NE and choose Configuration > NE Attribute from the Function Tree.
Step 2 In the NE Attribute dialog box, enter a new NE name in Name. Click Apply. A prompt appears telling you that the operation was successful.
NOTE
An NE name can contain a maximum of 64 letters, symbols, and numerals, but cannot contain the following
special characters: | : * ? " < >.
Step 3 Click Close.
----End
3 Deleting NEs
If you have created a wrong NE, you can delete the NE from the U2000. Deleting an NE removes all information of the NE from the U2000 but does not affect the running of the equipment.
Prerequisites
You must be an NM user with NE maintainer authority or higher.
Context When the NE is not logged in, you can delete the NE on the U2000.
NOTE
If an NE is deleted, the links related to the NE are also deleted.
The steps:
Delete a single SDH NE
1. Right-click the NE on the Main Topology and choose Delete > Delete NE from the
shortcut menu. The Confirm dialog box is displayed.
2. Click Yes. The Delete Device Results dialog box is displayed.
3. Click Close, The NE icon is deleted from the Main Topology.
Delete NEs in batches
1. Choose Configuration > NE Configuration Data Management from the Main
Menu. The NE Configuration Data Management window is displayed.
2. In the left-hand pane, select multiple NEs and click . The Configuration Data
Management List pane displays the configuration data of all the selected NEs.
3. Select the NEs to be deleted, right-click and choose Delete from the shortcut menu.
The Delete the NE dialog box is displayed.
4. Click OK.
----End
OSN 500 aslo works for this configuration.
More related:
No comments:
Post a Comment