Showing posts with label NE40E-X8. Show all posts
Showing posts with label NE40E-X8. Show all posts

Tuesday, March 15, 2016

Huawei NE40E-X16 Overview

System Overview

The Huawei NE40E series adopt a centralized routing engine and distributed forwarding architecture. This helps to provide rich and flexible service and to perform large-capacity forwarding.

The Huawei NE40E-X16 has an integrated chassis, with main components which all support hot swapping.

The NE40E-X16 supports all the Line Processing Units (LPUs) on the former NE40E, but the Main Processing Units (MPUs) and Switch Fabric Units (SFUs) are new.

The NE40E-X16 has 16 LPU slots. The switching capacity of the entire system is 12.58 Tbit/s.

Appearance of the NE40E-X16



System Architecture

The NE40E-X16 adopts system architecture. In this architecture, the data plane, management and control plane, and monitoring plane are separated. This design helps to improve system reliability and facilitates upgrading of each plane separately.

Diagram of the system architecture

ne40e-x16 system architeture

System Features

The NE40E-X16 provides the following system features:
  • Unblocked switching network that can be upgraded, with switching capacity at the Tbit/s level
  • Distributed hardware-based forwarding and fast service deployment
  • Compact structure to increase interface density
  • Normalized design of system components
  • Separation of the control channel, service channel, and monitoring channel to ensure non-blacking control channels and monitoring channels
  • Carrier-class high reliability and manageability
  • Shielding at the modular level to meet ElectroMagnetic Compatibility (EMC) requirements
  • Hot-swappable boards, power modules, and fans
  • U-shaped air channels to improve system heat dissipation
  • Distributed power supply to enhance power supply capability for a single chassis
  • Support for 200 mm (7.87 in.) fans
  • MPUs in 1:1 backup mode
  • SFUs in load balancing mode
  • Backup for key components such as power modules, fan modules, clocks, and management buses
  • Protection against incorrect of boards
  • Queries about alarm prompts, alarm indications, running status, and alarm status of the voltage and ambient temperature

Monday, March 7, 2016

Huawei NE40E-X8 Specification

Features
Large-capacity core and edge routers for converged networks supporting video, voice, and data services, with comprehensive user management and accounting features
High-capacity routing boards up to 480 Gbit/s and 1 Tbit/s line speeds; virtualization and SDN support
Designed for reliability and comprehensive support for service management including L2 and L3 VPNs, multicast VPN, MPLS TE, QoS, GRE, IPsec, NetStream, and full virtualization
IP hard-pipe technology supports leased lines similar to SONET and Synchronous Digital Hierarchy (SDH) networks
Huawei’s proprietary IP Flow Performance Measurement (FPM) monitors services in real time for rapid fault detection
Non-Stop Routing (NSR), Non-Stop Forwarding (NSF), and In-Service Software Upgrade (ISSU) improve services recovery and ensure uninterrupted service forwarding
Quick Details
Products Status:StockType:WiredApplication:Enterprise
Function:Firewall,QoS,VPNLAN Ports:16Certification:CE
Brand Name:huaweiModel Number:NE40EPlace of Origin:Guangdong China (Mainland)
Dimension:442mm * 650mm * 1420mm (32 U)Switching Capacity:12.58 TbpsForwarding Performance:3200 Mpps
Slots:22 slots
AttributeNE40E-X16NE40E-X8NE40E-X3
Switching Capacity12.58 Tbps7.08 Tbps1.08T bps
Forwarding Performance3200 Mpps1600 Mpps300 Mpps
Number of Slots22 slots, including 2 MPUs(1:1 backup), 4 SFUs(3+1 backup), and 16 LPUs11 slots, including 2 SRUs(1:1 backup), 1 SFUs(2+1 backup), and 8 LPUs5 slots, including 2 MPUs(1:1 backup) and 3 LPUs
Dimension (W×D×H)442mm × 650mm × 1420mm (32 U)442mm × 650mm × 620mm (14 U)442mm × 650 mm × 175mm (DC 4 U)
442mm × 650 mm × 220mm (AC 5 U)
Maximum power consumption4,610W (120G)2,340W (120G)1,070W (AC)
7,970W (240G)4,100W (240G)920W (DC)
Weight in full configuration267 kg130 kg41 kg (DC)
51 kg (AC)
Interface type100GE/40GE10GE-LAN/WAN
GE/FEOC-768c/STM-256c POS
OC-192c/STM-64c POSOC-48c/STM-16c POS
OC-12c/STM-4c POSOC-3c/STM-1c POS
Channelized OC-3/STM-1OC-3c/STM-1c ATM
OC-12c/STM-4c ATME3/CT3
CE1/CT1E1/T1
IPv4Supports the static routing protocol and IPv4 dynamic routing protocols such as RIP, OSPF, IS-IS, and BGP-4.
IPv6Supports various technologies for transition from IPv4 to IPv6: manual tunnel configurations, automatic tunnel configurations, IPv6-to-IPv4 (6-to-4) tunneling, Generic Routing Encapsulation (GRE) tunneling, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunneling.
Supports IPv4 over IPv6 tunneling and IPv6 Provider Edge Router (6PE).
Supports the IPv6 static routing protocol.
Supports IPv6 dynamic routing protocols such as RIP Next Generation (RIPng), OSPFv3, IS-ISv6, and BGP4+.
Supports IPv6 neighbor discovery and path Maximum Transmission Unit (PMTU) discovery.
Supports Transmission Control Protocol Version 6 (TCP6), ping IPv6, traceroute IPv6, socket IPv6, static IPv6 Domain Name System (DNS), specifying the IPv6 DNS server, Trivial File Transfer Protocol (TFTP) IPv6 client, and IPv6 policy-based routing.
Supports Internet Control Message Protocol Version 6 (ICMPv6) Management Information Base (MIB), User Datagram Protocol Version 6 (UDP6) MIB, TCP6 MIB, and IPv6 MIB.
Supports L2NAT,NAT444,DS-LITE
MPLSSupports LDP over TE, VPLS, H-VPLS, policy-based routing in VPN.
Supports MPLS L2VPNs in either Martini or Kompella mode.
Supports VLL/VPLS access L3VPNs.
Supports QinQ, MPLS/BGP L3VPN, and inter-AS VPN Option A/B/C.
Supports Asynchronous Transfer Mode (ATM) E1, Inverse Multiplexing over ATM (IMA), and Time-Division Multiplexing (TDM) PWE3.
Supports MPLS-TP.
Layer 2 featureSupports IEEE802.1q, IEEE802.1p, IEEE 802.3ad, and IEEE 802.1ab.
Supports the Spanning Tree Protocol (STP), Rapid Spanning Tree Protocol (RSTP), Multiple Spanning Tree Protocol (MSTP), RRPP, DHCP+, VLAN switching, and user binding.
ReliabilitySupports BGP GR, IS-IS GR, and OSPF GR.
Supports LDP GR, Resource-Reservation Protocol (RSVP) GR, and Non-Stop Forwarding (NSF).
Supports VLL/VPLS/L3VPN GR/NSF.
Supports multicast NSF.
Supports BGP/IS-IS/OSPF/LDP/RSVP-TE/PIM/ISSU Non-Stop Routing (NSR).
Supports In-Service Software Upgrade (ISSU).
Supports fast convergence of Interior Gateway Protocols (IGPs), BGP, and multicast routing.
Supports IP/LDP/VPN/TE/VLL FRR.
Supports IP Auto FRR.
Supports BFD for the static routing protocol and protocols such as IS-IS, RSVP, LDP, TE, Label Switched Path (LSP), PW, OSPF, BGP, VRRP, PIM, and RRPP.
Supports RRPP.
Supports MPLS OAM and Ethernet OAM, Y.1731.
Supports backup of service routers, PW redundancy, and PWE3 end-to-end protection.
Supports E-Trunk, E-APS, E-STP.
QoSSupports Weighted Random Early Detection (WRED), DS-TE capability with a maximum of eight CTs, five-level H-QoS scheduling, VLL/PWE3 QoS, and MPLS H-QoS.
Supports the last mile QoS.
Supports multicast replication of IPoE access users.
MulticastSupports IGMPv1, IGMPv2, IGMPv3, IGMP snooping, multicast VPN, and IPv6 multicast.
Supports static multicast routes.
Supports multicast routing protocols: PIM-DM, PIM-SM, PIM-SSM, Multicast source Discovery Protocol (MSDP), and Multi protocol BGP (MBGP).
Supports the deployment of both multicast and TE.
Supports multicast CAC.
User managementSupports management over access users such as IP over X (IPoX) access users.
Supports user authentication protocols, such as Password Authentication Protocol (PAP), Challenge Handshake Authentication Protocol (CHAP), Microsoft CHAP (MSCHAP), Remote Authentication Dial In User Service (RADIUS), and Huawei Terminal Access Controller Access Control System (HWTACACS).
Supports user accounting protocols, such as RADIUS, HWTACACS, and Common Open Policy Service (COPS).
Supports user authorization protocols, such as RADIUS, HWTACACS, and COPS.
Supports protocols such as COPS and Change of Authorization (CoA).
SecuritySupports ACL filtering, URPF, GTSM, and DHCP Snooping.
Supports anti-ARP attack and anti-DOS attack.
Supports MAC address limitation and bonding between MAC and IP.
Supports SSH and SSH v2.
Supports NetStream.
Supports IPSec.
Clock transmissionSupports Adaptive Clock Recovery (ACR), Differential Clock Recovery (DCR), Ethernet clock synchronization, and IEEE 1588v2.
IP RANSupports TDM PWE3 and ATM PWE3
Supports ATM IMA
Supports MPLS-TP
Supports CSG Plug-and-Play
Environmental requirementsLong-term ambient temperature: 0oC to 45oC
Short-term ambient temperature: –5oC to +55oC
Temperature change rate: 30oC/hour
Long-term relative humidity: 5% to 85%, non-condensing
Short-term relative humidity: 0% to 95%, non-condensing
Working altitude: lower than 3000 meters
Important parameters
Port structureModular
Qos : Support           : Support
VPN                   : Support
Support Network Security : Support
Network Security         : Support
NetStream             : Support
SSH、SSH v2         : Support
ACL packet filtering     : Support
URPF, GTSM, DHCP Snooping                 : Support
ARP attack defense, anti-DOS / DDOS attack     : Support
MAC address restriction
Power: Maximum 2800W
2 Basic parameter editing
Multi-service router port router type modular structure
Expansion Module 8 business board slot +2 +1 routing exchange board slot switching network board slots
3 function parameter editing
[1] Qos Support
VPN Support
Network Security Support ACL packet filtering
Support URPF, GTSM, DHCP Snooping
Support anti-ARP attack, anti-DOS / DDOS attack
Support MAC address restrictions, MAC and IP binding
Support SSH, SSH v2, support NetStream
4 Other parameter editing
Power maximum 2800W
Product size 650 × 442 × 620mm
Weight 118kg fully configured
Environmental standards long-term temperature: 0-45 ℃
Long-term relative humidity: 5% -85% RH
Short-term temperature: -5-55 ℃
Short-term relative humidity: 0% -100% RH
Other properties 1.44Tbps switching capacity
Forwarding performance 800Mpps
Contact information:
Telephone: 852-30623083
Email: Sales@Thunder-Link.com
             Supports@Thunder-link.com             
Website: http://www.thunder-link.com

More blog:
Huawei Low-end Switches Boot Upgrade For BOOTROM
Huawei Low-end Switches Upgrade The APP System
Cisco-Router-IOS Configuration Backup And Recovery
Optical attenuation is too large lead to ONU recovery failure