Showing posts with label AR1200 router. Show all posts
Showing posts with label AR1200 router. Show all posts

Tuesday, March 15, 2016

The Differences in System Configurations of Various AR Series Routers

What Are the Differences in System Configurations of Various AR Series Routers?


Table 1 describes the differences in system configurations of various AR series routers.
Table 1  System configurations of AR series routers
Model
Processor
Memory
Flash Memory
Micro SD Card (Default)
Dual-core 533 MHz
512 MB
512 MB
0
Dual-core 500 MHz
512 MB
256 MB
0
AR2201-48FE
AR2202-48FE
Dual-core 533 MHz
512 MB
512 MB
0
AR2204
Dual-core 800 MHz
1 GB
512 MB
0
AR2220L
Dual-core 800 MHz
1 GB
512 MB
0
AR2220
4-core 600 MHz
2 GB
16 MB
2 GB
8-core 600 MHz
2 GB
16 MB
2 GB
AR3260
12-core 750 MHz
2 GB
16 MB
2 GB

The more information about technical support you can consult with our engineer the e-mail address is as below: supports@thunder-link.com
Telephone: 852-30623083
           Supports@Thunder-link.com            
Posted by at No comments:
Labels: , , , , , , , , , , , , , , , , ,

Sunday, March 13, 2016

Configuring VLAN ID-based QinQ Stacking on Huawei Router

Background
QinQ mitigates VLAN ID shortage and is widely applied when users connect to carrier networks.
When private networks connect to a carrier network through CEs and PEs, run the qinq
stacking command on CE interfaces connected to PEs so that the CE interfaces add the outer VLAN tag allocated by the carrier to user packets. This implementation saves VLAN IDs and allows user packets to be transparently transmitted on the carrier network.
The configuration overview:
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
bridge bridge-id
A bridge group is created and the bridge group view is displayed.
Step 3 Run:
quit
Exit from the bridge group view.
Step 4 Run:
interface { ethernet | gigabitethernet }.subinterface-number
The Ethernet sub-interface view is displayed.
NOTE
Sub-interfaces can only be created on Layer 3 Ethernet interfaces. If an interface works in Layer 2 mode and supports switching between Layer 2 and Layer 3 modes, run the undo portswitch command to switch the interface in Layer 3 mode before creating a sub-interface on the interface.
Step 5 Run:
bridge bridge-id
The Ethernet sub-interface is added to the bridge group.
Step 6 Run:
bridge vlan-transmit enable
The interface is enabled to transparently transmit VLAN IDs.
Step 7 Run:
qinq stacking vid low-ce-vid [ to high-ce-vid ] pe-vid pe-vid [ remark-8021p 8021pvalue2]
VLAN ID-based QinQ stacking is configured.
—-End
This configuration works for Huawei router, such as Huawei AR1200, Huawei AR2220, Huawei AR3200, Huawei AR2200

Telephone: 852-30623083
           Supports@Thunder-link.com            
Posted by at No comments:
Labels: , , , , , , , , , ,
Subscribe to: Posts (Atom)